Automobile Engineers League

Construction & Working of Supercharging System and Turbocharging System. OBJECTIVES: To get knowledge about the Supercharging its drives, types and their construction and working.and turbo charging system. Introduction: A   supercharger   is an air   compressor   used for increasing the   pressure, temperature, and density of air   supplied to an   internal combustion engine . This compressed air supplies a greater mass of oxygen per cycle of the engine to support combustion than available to a   naturally aspirated engine , enabling for more   fuel   to be burned and more work   to be done per cycle, thus allowing to increase the power produced by the engine.Power for the supercharger can be provided mechanically by means of a belt, gear, shaft, or chain connected to the engine's   crankshaft . When power is provided by a turbine   powered by   exhaust gas , a supercharger is known as a   turbo ...

Construction & Working of lubrication systems. OBJECTIVES:- ·          To get knowledge about the lubricating system its additives, components. INTRODUCTION:- ·          Lubrication system is used in the engine to run the engine by keeping wear proof, and working it without getting over heat, and keep the parts smooth and easily movable. ·          An   Automatic Lubrication System, often referred to as a Centralized Lubrication System, generally comprises a controller or timer, a   pump   and   reservoir ,   metering valves   and   fittings   and supply and   feed lines . ·          It typically delivers a controlled amount of   lubricant   (either   grease   or   oil ) to multiple, specific locations on a machine while the machine is op...